Publications
Microscale damage evolution and stress redistribution in Ti–SiC fiber composites." Acta Materialia 51 (2003): 4239-4250.
"Micromechanical simulation of the failure of fiber reinforced composites." Journal of the Mechanics and Physics of Solids 48 (2000): 621-648.
"Meso-scale modeling the orientation and interface stability of Cu/Nb-layered composites by rolling." JOM 65 (2013): 431-442.
"Mesoscale investigations for the evolution of interfaces in plasticity." Current Opinion in Solid State and Materials Science 19 (2015): 203-211.
"Mechanisms for initial grain refinement in OFHC copper during equal channel angular pressing." Acta Materialia 55 (2007): 655-668.
"Mechanical properties of bone-shaped-short-fiber reinforced composites." Acta Materialia 47 (1999): 1767-1781.
"A measure of plastic anisotropy for hexagonal close packed metals: application to alloying effects on the formability of Mg." Journal of Alloys and Compounds 695 (2017): 1488-1497.
"A measure of plastic anisotropy for hexagonal close packed metals: Application to alloying effects on the formability of Mg." Journal of Alloys and Compounds 695 (2017): 1488-1497.
"Material-based design of the extrusion of bimetallic tubes." Computational Materials Science 95 (2014): 63-73.
"Mapping dislocation nucleation behavior from bimetal interfaces." Acta Materialia 61 (2013): 7488-7499.
"Manipulating dislocation nucleation and shear resistance of bimetal interfaces by atomic steps." Acta Materialia 113 (2016): 194-205.
"Loading-and substructure-induced irreversibility in texture during route C equal channel angular extrusion." Scripta Materialia 53 (2005): 965-969.
"Load transfer from broken fibers in continuous fiber alumina-aluminum composites and dependence on local volume fraction." Journal of the Mechanics and Physics of Solids 47 (1999): 465-502.
"Layer size effect on the shock compression behavior of fcc–bcc nanolaminates." Acta Materialia 79 (2014): 74-83.
"Issues on the design of bone-shaped short fiber composites." Journal of Advanced Materials 35 (2003): 51-60.
"Investigation of texture in ECAP materials using neutron diffraction." Materials Science Forum 426-432 (2003): 2661-2666.
"Introducing grain boundary influenced stochastic effects into constitutive models." JOM 65 (2013): 419-430.
"Interfacially driven deformation twinning in bulk Ag-Cu composites." JOM 64 (2012): 1218-1226.
"Interface-facilitated deformation twinning in copper within submicron Ag–Cu multilayered composites." Scripta Materialia 64 (2011): 1083-1086.
"Interface-driven plasticity: The presence of an interface affected zone in metallic lamellar composites." Advanced Engineering Materials 17 (2015): 109-114.
"Interface-driven microstructure development and ultra high strength of bulk nanostructured Cu-Nb multilayers fabricated by severe plastic deformation." Journal of Materials Research 28 (2013): 1799-1812.
"Interface-dominant multilayers fabricated by severe plastic deformation: Stability under extreme conditions." Current Opinion in Solid State and Materials Science 19 (2015): 265-276.
"Interface-dependent nucleation in nanostructured layered composites." Applied Physics Letters Materials 1 (2013): 032112.
"Interface facilitated transformation of voids directly into stacking fault tetrahedra." Acta Materialia 188 (2020): 623-634.
"An interface facet driven Rayleigh instability in high-aspect-ratio bimetallic nanolayered composites." Applied Physics Letters 105 (2014): 111901.
"