Publications
The influence of rolling schedule on the dynamic properties of accumulatively roll bonded nano-layered Cu-Nb." Key Engineering Materials 622-623 (2014): 1031-1040.
"Influence of slip and twinning on the crystallographic stability of bimetal interfaces in nanocomposites under deformation." Acta Materialia 72 (2014): 137-147.
"Influence of the stacking fault energy surface on partial dislocations in fcc metals with a three-dimensional phase field dislocations dynamics model." Physical Review B 84 (2011): 144108.
"In-situ, ex-situ EBSD and (HR-) TEM analyses of primary, secondary and tertiary twin development in an Mg–4wt% Li alloy." Materials Science and Engineering A 610 (2014): 54-64.
"In-situ X-ray diffraction and crystal plasticity modeling of the deformation behavior of extruded Mg–Li–(Al) alloys: An uncommon tension–compression asymmetry." Acta Materialia 86 (2015): 254-268.
"Integrating in-situ multi-modal characterizations with signatures to investigate localized deformation." Materials Characterization 205 (2023): 113332.
"On the interaction between slip dislocations and twins in HCP Zr." Materials Science and Engineering: A 513 (2009): 42-51.
"Interaction of small, mobile stacking fault tetrahedra with free surfaces, dislocations and interfaces in Cu and Cu-Nb." Physical Review B 93 (2016): 054105.
"Interface dislocation patterns and dislocation nucleation in face-centered-cubic and body-centered-cubic bicrystal interfaces." International Journal of Plasticity 53 (2014): 40-55.
"An interface facet driven Rayleigh instability in high-aspect-ratio bimetallic nanolayered composites." Applied Physics Letters 105 (2014): 111901.
"Interface facilitated transformation of voids directly into stacking fault tetrahedra." Acta Materialia 188 (2020): 623-634.
"Interface-dependent nucleation in nanostructured layered composites." Applied Physics Letters Materials 1 (2013): 032112.
"Interface-dominant multilayers fabricated by severe plastic deformation: Stability under extreme conditions." Current Opinion in Solid State and Materials Science 19 (2015): 265-276.
"Interface-driven microstructure development and ultra high strength of bulk nanostructured Cu-Nb multilayers fabricated by severe plastic deformation." Journal of Materials Research 28 (2013): 1799-1812.
"Interface-driven plasticity: The presence of an interface affected zone in metallic lamellar composites." Advanced Engineering Materials 17 (2015): 109-114.
"Interface-facilitated deformation twinning in copper within submicron Ag–Cu multilayered composites." Scripta Materialia 64 (2011): 1083-1086.
"Interfacially driven deformation twinning in bulk Ag-Cu composites." JOM 64 (2012): 1218-1226.
"Introducing grain boundary influenced stochastic effects into constitutive models." JOM 65 (2013): 419-430.
"Investigation of texture in ECAP materials using neutron diffraction." Materials Science Forum 426-432 (2003): 2661-2666.
"Issues on the design of bone-shaped short fiber composites." Journal of Advanced Materials 35 (2003): 51-60.
"Layer size effect on the shock compression behavior of fcc–bcc nanolaminates." Acta Materialia 79 (2014): 74-83.
"Load transfer from broken fibers in continuous fiber alumina-aluminum composites and dependence on local volume fraction." Journal of the Mechanics and Physics of Solids 47 (1999): 465-502.
"Loading-and substructure-induced irreversibility in texture during route C equal channel angular extrusion." Scripta Materialia 53 (2005): 965-969.
"Manipulating dislocation nucleation and shear resistance of bimetal interfaces by atomic steps." Acta Materialia 113 (2016): 194-205.
"Mapping dislocation nucleation behavior from bimetal interfaces." Acta Materialia 61 (2013): 7488-7499.
"