Publications
High-strength and thermally stable bulk nanolayered composites due to twin-induced interfaces." Nature Communications 4 (2013): 1696.
"Homogenization of plastic deformation in heterogeneous lamella structures." Materials Research Letters 5 (2017): 251-257.
"Hybrid dislocation dynamics based strain hardening constitutive model." International Journal of Plasticity 49 (2013): 119-144.
"Ideal simple shear strengths of two HfNbTaTi-based quinary refractory multi-principal element alloys." APL Materials 10 (2022): 111107.
"The importance of cross-slip in high-rate deformation." Modelling and Simulation in Materials Science and Engineering 15 (2007): 675-690.
"In situ neutron diffraction measurements during annealing of deformed beryllium with differing initial textures." Metallurgical and Materials Transactions A 44 (2013): 5665-5675.
"In situ transmission electron microscopy investigation on 〈c a〉 slip in Mg." Journal of Materials Research 34 (2019): 1499-1508.
"Incorporating interface affected zones into crystal plasticity." International Journal of Plasticity 65 (2015): 206-225.
"Inertial effects in the pullout mechanism during dynamic loading of a bridged crack." Acta Materialia 49 (2001): 3863-3877.
"The influence of anisotropy on the core structure of Shockley partial dislocations within FCC materials." Modelling and Simulation in Materials Science and Engineering 26 (2017): 015010.
"On the influence of fiber shape in bone-shaped short-fiber composites." Composites Science and Technology 61 (2001): 1341-1357.
"The influence of grain interactions on the plastic stability of heterophase interfaces." Materials 7 (2014): 302-322.
"Influence of plastic properties on the grain size effect on twinning in Ti and Mg." Materials Science and Engineering: A 771 (2020): 138644.
"The influence of rolling schedule on the dynamic properties of accumulatively roll bonded nano-layered Cu-Nb." Key Engineering Materials 622-623 (2014): 1031-1040.
"Influence of slip and twinning on the crystallographic stability of bimetal interfaces in nanocomposites under deformation." Acta Materialia 72 (2014): 137-147.
"Influence of the stacking fault energy surface on partial dislocations in fcc metals with a three-dimensional phase field dislocations dynamics model." Physical Review B 84 (2011): 144108.
"Insight into microstructure-sensitive elastic strain concentrations from integrated computational modeling and digital image correlation." Scripta Materialia 192 (2021): 78-82.
"Insights into Plastic Localization by Crystallographic Slip from Emerging Experimental and Numerical Approaches." Annual Review of Materials Research 53 (2023): 275-317.
"In-situ, ex-situ EBSD and (HR-) TEM analyses of primary, secondary and tertiary twin development in an Mg–4wt% Li alloy." Materials Science and Engineering A 610 (2014): 54-64.
"In-situ X-ray diffraction and crystal plasticity modeling of the deformation behavior of extruded Mg–Li–(Al) alloys: An uncommon tension–compression asymmetry." Acta Materialia 86 (2015): 254-268.
"Integrating in-situ multi-modal characterizations with signatures to investigate localized deformation." Materials Characterization 205 (2023): 113332.
"On the interaction between slip dislocations and twins in HCP Zr." Materials Science and Engineering: A 513 (2009): 42-51.
"Interaction of extended dislocations with nanovoid clusters." International Journal of Plasticity 168 (2023): 103684.
"Interaction of small, mobile stacking fault tetrahedra with free surfaces, dislocations and interfaces in Cu and Cu-Nb." Physical Review B 93 (2016): 054105.
"Interface dislocation patterns and dislocation nucleation in face-centered-cubic and body-centered-cubic bicrystal interfaces." International Journal of Plasticity 53 (2014): 40-55.
"