Publications
Layer size effect on the shock compression behavior of fcc–bcc nanolaminates." Acta Materialia 79 (2014): 74-83.
"Load transfer from broken fibers in continuous fiber alumina-aluminum composites and dependence on local volume fraction." Journal of the Mechanics and Physics of Solids 47 (1999): 465-502.
"Loading-and substructure-induced irreversibility in texture during route C equal channel angular extrusion." Scripta Materialia 53 (2005): 965-969.
"Manipulating dislocation nucleation and shear resistance of bimetal interfaces by atomic steps." Acta Materialia 113 (2016): 194-205.
"Mapping dislocation nucleation behavior from bimetal interfaces." Acta Materialia 61 (2013): 7488-7499.
"Material-based design of the extrusion of bimetallic tubes." Computational Materials Science 95 (2014): 63-73.
"A measure of plastic anisotropy for hexagonal close packed metals: application to alloying effects on the formability of Mg." Journal of Alloys and Compounds 695 (2017): 1488-1497.
"A measure of plastic anisotropy for hexagonal close packed metals: Application to alloying effects on the formability of Mg." Journal of Alloys and Compounds 695 (2017): 1488-1497.
"Mechanical properties of bone-shaped-short-fiber reinforced composites." Acta Materialia 47 (1999): 1767-1781.
"Mechanisms for initial grain refinement in OFHC copper during equal channel angular pressing." Acta Materialia 55 (2007): 655-668.
"Mesoscale investigations for the evolution of interfaces in plasticity." Current Opinion in Solid State and Materials Science 19 (2015): 203-211.
"Meso-scale modeling the orientation and interface stability of Cu/Nb-layered composites by rolling." JOM 65 (2013): 431-442.
"Micromechanical simulation of the failure of fiber reinforced composites." Journal of the Mechanics and Physics of Solids 48 (2000): 621-648.
"Microscale damage evolution and stress redistribution in Ti–SiC fiber composites." Acta Materialia 51 (2003): 4239-4250.
"Microscale elastic strain evolution following damage in Ti-SiC composites." Metallurgical and Materials Transactions A 33 (2002): 3839-3845.
"Microstructural evolution of nanolayered Cu–Nb composites subjected to high-pressure torsion." Acta Materialia 72 (2014): 178-191.
"Microstructure and texture evolution during equal channel angular extrusion of interstitial-free steel: Effects of die angle and processing route." Acta Materialia 55 (2007): 1017-1032.
"Microstructure, crystallographic texture, and plastic anisotropy evolution in an Mg alloy during equal channel angular extrusion processing." Materials Science and Engineering A 528 (2011): 7616-7627.
"Microstructure effects on the recrystallization of low-symmetry alpha-uranium." Journal of Nuclear Materials 465 (2015): 189-195.
"Minimum energy structures of faceted, incoherent interfaces." Journal of Applied Physics 112 (2012): 073501.
"Mini-tensile experiments of clock-rolled zirconium plate." Experimental Mechanics 50 (2010): 65-70.
"Misfit strain relaxation mechanisms in core/shell nanowires." JOM 64 (2012): 1258-1262.
"Modeling compression reloads in copper pre-strained by equal channel angular extrusion (ECAE)." Materialwissenschaft und Werkstofftechnik 36 (2005): 541-545.
"Modeling discrete twin lamellae in a microstructural framework." Scripta Materialia 121 (2016): 84-88.
"Modeling interface-dominated mechanical behavior of nanolayered crystalline composites." JOM 66 (2014): 102-113.
"