Publications
On the influence of fiber shape in bone-shaped short-fiber composites." Composites Science and Technology 61 (2001): 1341-1357.
"Influence of slip and twinning on the crystallographic stability of bimetal interfaces in nanocomposites under deformation." Acta Materialia 72 (2014): 137-147.
"Interface-driven mechanisms in cubic/noncubic nanolaminates at different scales." MRS Bulletin 44 (2019): 31-39.
"Interface-dependent nucleation in nanostructured layered composites." Applied Physics Letters Materials 1 (2013): 032112.
"Interface-driven microstructure development and ultra high strength of bulk nanostructured Cu-Nb multilayers fabricated by severe plastic deformation." Journal of Materials Research 28 (2013): 1799-1812.
"In situ neutron diffraction measurements during annealing of deformed beryllium with differing initial textures." Metallurgical and Materials Transactions A 44 (2013): 5665-5675.
"On the interaction between slip dislocations and twins in HCP Zr." Materials Science and Engineering: A 513 (2009): 42-51.
"Interface-driven plasticity: The presence of an interface affected zone in metallic lamellar composites." Advanced Engineering Materials 17 (2015): 109-114.
"The influence of rolling schedule on the dynamic properties of accumulatively roll bonded nano-layered Cu-Nb." Key Engineering Materials 622-623 (2014): 1031-1040.
"Inertial effects in the pullout mechanism during dynamic loading of a bridged crack." Acta Materialia 49 (2001): 3863-3877.
"Influence of the stacking fault energy surface on partial dislocations in fcc metals with a three-dimensional phase field dislocations dynamics model." Physical Review B 84 (2011): 144108.
"Interface facilitated transformation of voids directly into stacking fault tetrahedra." Acta Materialia 188 (2020): 623-634.
"Influence of plastic properties on the grain size effect on twinning in Ti and Mg." Materials Science and Engineering: A 771 (2020): 138644.
"Insight into microstructure-sensitive elastic strain concentrations from integrated computational modeling and digital image correlation." Scripta Materialia 192 (2021): 78-82.
"In-situ, ex-situ EBSD and (HR-) TEM analyses of primary, secondary and tertiary twin development in an Mg–4wt% Li alloy." Materials Science and Engineering A 610 (2014): 54-64.
"In-situ X-ray diffraction and crystal plasticity modeling of the deformation behavior of extruded Mg–Li–(Al) alloys: An uncommon tension–compression asymmetry." Acta Materialia 86 (2015): 254-268.
"Investigation of twin growth mechanisms in precipitate hardened AZ91." Acta Materialia 242 (2023): 118471.
"Interface-facilitated stable plasticity in ultra-fine layered FeAl/FeAl2 micro-pillar at high temperature." Journal of Materials Science & Technology 73 (2021): 61-65.
"Interface-dominant multilayers fabricated by severe plastic deformation: Stability under extreme conditions." Current Opinion in Solid State and Materials Science 19 (2015): 265-276.
"Interfacially driven deformation twinning in bulk Ag-Cu composites." JOM 64 (2012): 1218-1226.
"Interaction of small, mobile stacking fault tetrahedra with free surfaces, dislocations and interfaces in Cu and Cu-Nb." Physical Review B 93 (2016): 054105.
"The influence of grain interactions on the plastic stability of heterophase interfaces." Materials 7 (2014): 302-322.
"Incorporating interface affected zones into crystal plasticity." International Journal of Plasticity 65 (2015): 206-225.
"Introducing grain boundary influenced stochastic effects into constitutive models." JOM 65 (2013): 419-430.
"Interaction of extended dislocations with nanovoid clusters." International Journal of Plasticity 168 (2023): 103684.
"