Publications
Interface dislocation patterns and dislocation nucleation in face-centered-cubic and body-centered-cubic bicrystal interfaces." International Journal of Plasticity 53 (2014): 40-55.
"Interaction of small, mobile stacking fault tetrahedra with free surfaces, dislocations and interfaces in Cu and Cu-Nb." Physical Review B 93 (2016): 054105.
"On the interaction between slip dislocations and twins in HCP Zr." Materials Science and Engineering: A 513 (2009): 42-51.
"Integrating in-situ multi-modal characterizations with signatures to investigate localized deformation." Materials Characterization 205 (2023): 113332.
"In-situ X-ray diffraction and crystal plasticity modeling of the deformation behavior of extruded Mg–Li–(Al) alloys: An uncommon tension–compression asymmetry." Acta Materialia 86 (2015): 254-268.
"In-situ, ex-situ EBSD and (HR-) TEM analyses of primary, secondary and tertiary twin development in an Mg–4wt% Li alloy." Materials Science and Engineering A 610 (2014): 54-64.
"Influence of the stacking fault energy surface on partial dislocations in fcc metals with a three-dimensional phase field dislocations dynamics model." Physical Review B 84 (2011): 144108.
"Influence of slip and twinning on the crystallographic stability of bimetal interfaces in nanocomposites under deformation." Acta Materialia 72 (2014): 137-147.
"The influence of rolling schedule on the dynamic properties of accumulatively roll bonded nano-layered Cu-Nb." Key Engineering Materials 622-623 (2014): 1031-1040.
"The influence of grain interactions on the plastic stability of heterophase interfaces." Materials 7 (2014): 302-322.
"On the influence of fiber shape in bone-shaped short-fiber composites." Composites Science and Technology 61 (2001): 1341-1357.
"Inertial effects in the pullout mechanism during dynamic loading of a bridged crack." Acta Materialia 49 (2001): 3863-3877.
"Incorporating interface affected zones into crystal plasticity." International Journal of Plasticity 65 (2015): 206-225.
"In situ neutron diffraction measurements during annealing of deformed beryllium with differing initial textures." Metallurgical and Materials Transactions A 44 (2013): 5665-5675.
"The importance of cross-slip in high-rate deformation." Modelling and Simulation in Materials Science and Engineering 15 (2007): 675-690.
"Hybrid dislocation dynamics based strain hardening constitutive model." International Journal of Plasticity 49 (2013): 119-144.
"High-strength and thermally stable bulk nanolayered composites due to twin-induced interfaces." Nature Communications 4 (2013): 1696.
"Heterostructured stainless steel: Properties, current trends, and future perspectives." Materials Science and Engineering: R: Reports 150 (2022): 100691.
"The heterophase interface character distribution of physical vapor-deposited and accumulative roll-bonded Cu–Nb multilayer composites." Acta Materialia 60 (2012): 1747-1761.
"Heterogeneity of deformation texture in equal channel angular extrusion of copper." Acta Materialia 52 (2004): 4859-4875.
"Growth twins and deformation twins in metals." Annual Review of Materials Research 44 (2014): 329-363.
"Grain size effects on primary, secondary, and tertiary twin development in Mg-4wt%Li (-1wt %Al) alloys." Metallurgical and Materials Transactions A 45 (2014): 4737-4741.
"Grain size constraints on twin expansion in hexagonal close packed crystals." Journal of Applied Physics 120 (2016): 155105.
"Grain neighbour effects on twin transmission in hexagonal close packed materials." Nature Communications 7 (2016): 13826.
"Glide dislocation nucleation from dislocation nodes at semi-coherent {111} Cu–Ni interfaces." Acta Materialia 98 (2015): 206-220.
"