Publications
Found 544 results
Author Title [ Type![(Asc)](https://labs.me.ucsb.edu/beyerlein/irene/sites/all/modules/biblio/misc/arrow-asc.png)
Filters: First Letter Of Last Name is B [Clear All Filters]
Grain size dependent microstructure and texture evolution during dynamic deformation of nanocrystalline face-centered cubic materials." Acta Materialia 216 (2021): 117088.
"Grain size constraints on twin expansion in hexagonal close packed crystals." Journal of Applied Physics 120 (2016): 155105.
"Grain neighbour effects on twin transmission in hexagonal close packed materials." Nature Communications 7 (2016): 13826.
"Grain boundary slip – twin transmission in titanium." Acta Materialia 244 (2023): 118556.
"Glide dislocation nucleation from dislocation nodes at semi-coherent {111} Cu–Ni interfaces." Acta Materialia 98 (2015): 206-220.
"Geometrically necessary dislocation density evolution as a function of microstructure and strain rate." Materials Science and Engineering: A 831 (2022): 142224.
"Generalized stacking fault energies and Peierls stresses in refractory body-centered cubic metals from machine learning-based interatomic potentials." Computational Materials Science 192 (2021): 110364.
"Frank-Read source operation in six body-centered cubic refractory metals." Journal of the Mechanics and Physics of Solids 141 (2020): 104017.
"Fracture toughness of a composite reinforced with bone-shaped short fibers." Materials Science and Engineering A 317 (2001): 93-100.
"Formation of crystallographic texture during severe plastic deformation." Archives of Metallurgy and Materials 50 (2005): 281-294.
"First-principles study of the structure of Mg/Nb multilayers." Applied Physics Letters 105 (2014): 071602.
"First-principles study of crystallographic slip modes in ω-Zr." Scientific Reports 7 (2017): 8932.
"First-principles investigation of strain effects on the stacking fault energies, dislocation core structure, and Peierls stress of magnesium and its alloys." Phys. Rev. B 95 (2017): 224106.
"Finite element analysis of the plastic deformation zone and working load in equal channel angular extrusion." Materials Science and Engineering A 382 (2004): 217-236.
"Finite element analysis of the plastic deformation zone and working load in equal channel angular extrusion." Materials Science and Engineering A 382 (2004): 217-236.
"Fabrication and Characterization of High-Quality Epitaxial Nanocolumnar Niobium Films with Abrupt Interfaces on YSZ(001)." The Journal of Physical Chemistry C 126 (2022): 2098-2107.
"Explicit incorporation of deformation twins into crystal plasticity finite element models." Computer Methods in Applied Mechanics and Engineering 295 (2015): 396-413.
"Experimental characterization and crystal plasticity modeling of anisotropy, tension-compression asymmetry, and texture evolution of additively manufactured Inconel 718 at room and elevated temperatures." International Journal of Plasticity 125 (2020): 63-79.
"Experimental characterization and crystal plasticity modeling of anisotropy, tension-compression asymmetry, and texture evolution of additively manufactured Inconel 718 at room and elevated temperatures." International Journal of Plasticity 125 (2020): 63-79.
"Evolution of texture in a magnesium alloy processed by ECAP through dies with different angles." Materials Science and Engineering A 527 (2010): 1709-1718.
"Evidence of twinning-induced plasticity (TWIP) and ultrahigh hardness in additively-manufactured near-eutectic Ni–Nb." Journal of Materials Science 58 (2023): 9723-9736.
"Evidence of twinning-induced plasticity (TWIP) and ultrahigh hardness in additively-manufactured near-eutectic Ni–Nb." Journal of Materials Science 58 (2023): 9723-9736.
"Erratum to Mechanical behavior and texture evolution of WE43 magnesium-rare earth alloy in Split-Hopkinson Pressure Bar and Taylor Impact Cylinder Testing International Journal of Impact Engineering Volume 143 (2020) 103589." International Journal of Impact Engineering 144 (2020): 103656.
"Enhancing strength and thermal stability of TWIP steels with a heterogeneous structure." Materials Science and Engineering: A 720 (2018): 231-237.
"Enhancement of orientation gradients during simple shear deformation by application of simple compression." Journal of Applied Physics 117 (2015): 214309.
"