Publications
] "Modelling texture evolution in equal channel angular extrusion of bcc materials: Effects of processing route and initial texture." Modelling and Simulation in Materials Science and Engineering 13 (2005): 509-530.
"Non-uniform microstructure and texture evolution during equal channel angular extrusion." Philosophical Magazine 85 (2005): 1359-1394.
"An overview of modeling damage evolution in materials." In Damage Prognosis: For Aerospace, Civil and Mechanical Systems, 13-59. John Wiley & Sons, Ltd, 2005.
"Strain evolution after fiber failure in a single-fiber metal matrix composite under cyclic loading." Materials Science and Engineering A 399 (2005): 33-42.
"Texture evolution during equal channel angular extrusion: Effect of initial texture from experiment and simulation." Scripta Materialia 52 (2005): 1099-1104.
"Texture evolution during multi-pass equal channel angular extrusion of copper: Neutron diffraction characterization and polycrystal modeling." Acta Materialia 53 (2005): 2111-2125.
"Texture formation during equal channel angular extrusion of fcc and bcc materials: Comparison with simple shear." Materials Science and Engineering A 394 (2005): 66-77.
"Analytical modeling of material flow in equal channel angular extrusion (ECAE)." Materials Science and Engineering A 380 (2004): 171-190.
"Application of a substructure-based hardening model to copper under loading path changes." Metallurgical and Materials Transactions A 35 (2004): 3763-3774.
"Finite element analysis of the plastic deformation zone and working load in equal channel angular extrusion." Materials Science and Engineering A 382 (2004): 217-236.
"Heterogeneity of deformation texture in equal channel angular extrusion of copper." Acta Materialia 52 (2004): 4859-4875.
"Shear-lag model for a single fiber metal matrix composite with an elasto-plastic matrix and a slipping interface." International Journal of Solids and Structures 41 (2004): 4197-4218.
"Stress concentrations in graphite/epoxy model composites during creep at room temperature and elevated temperatures." Journal of Composite Materials 38 (2004): 417-433.
"Investigation of texture in ECAP materials using neutron diffraction." Materials Science Forum 426-432 (2003): 2661-2666.
"Issues on the design of bone-shaped short fiber composites." Journal of Advanced Materials 35 (2003): 51-60.
"Microscale damage evolution and stress redistribution in Ti–SiC fiber composites." Acta Materialia 51 (2003): 4239-4250.
"Modeling texture and microstructural evolution in the equal channel angular extrusion process." Materials Science and Engineering A 345 (2003): 122-138.
"A probabilistic diffusion weld modeling framework." Welding Journal 82 (2003): 170S-178S.
"Residual stresses in continuous-tungsten-fibre-reinforced Kanthal-matrix composites." Philosophical Magazine 83 (2003): 2267-2292.
"A time dependent micro-mechanical fiber composite model for inelastic zone growth in viscoelastic matrices." International Journal of Solids and Structures 40 (2003): 2171-2194.
"Time-dependent micromechanical behavior in graphite/epoxy composites under constant load at elevated temperatures." Journal of Materials Science 38 (2003): 877-884.
"Bone-shaped short fiber composites—an overview." Materials Science and Engineering A 326 (2002): 208-227.
"Delamination dynamics in through-thickness reinforced laminates with application to DCB specimen." International Journal of Fracture 118 (2002): 119-144.
"Microscale elastic strain evolution following damage in Ti-SiC composites." Metallurgical and Materials Transactions A 33 (2002): 3839-3845.
"Strength distributions and size effects for 2D and 3D composites with Weibull fibers in an elastic matrix." International Journal of Fracture 115 (2002): 41-85.